SCION xb Bossforms Enclosures Come: Pointed Metallic Block Terminal Cup with Duol Binding Post Polyfill Inside Lifetime Warranty Bossforms are Molded in Solid Fiberglass with Propnetory Damping Technologies and Co-efufly Engineered to Create a Highly Inert Structure (patent-pending) Hand Layered with 4-8 Layers of 2 Ounce Matting Lightest. Most Rigid Boxes on the Market Minimal Loss of Trunk Space - Removable - Modifiable Can be Color-Matched to Vehicle Interior or Exterior, Carbon Fiber. evIar. Custom Artwork, and many more Custom Molded from Actual Vehicle Delivering Integrated Factory Design .

• Scosche also designed an insert sub enclosure, this comes in black carpet. This is probably scion  the most affordable of the pre made inserts, but you lack the sound quality of the upgraded fiber glass enclosures. perhaps the best option is a one of a kind set up. This is what a sound system is all about. I have seen some amazing designs for the Scion xB get created.  You are scion only limited by what you can imagine. Audio Formz was the first to produce a fiberglass enclosure for the box for the general market. scion This also included speaker multiple amp rack products. These fit into the rear cargo area floor inserts, and can be painted to match OEM colors as well as any color of your choice. They hold 10" sub in an enclosed structure, it is important to find a speaker tuned to the air space provided. This along with poly fill provides some great results for a single 10" sub system. You can include a neighboring amp rack, but this causes you to permanently remove the spare tire. To combat that, audio formz also create amp racks that fit the very rear side window areas. All of these speaker components look great, and dwarf the cost of getting fiberglass done at a shop speaker scion.

A  enclosure is a cabinet designed to transmit speaker sound to the listener via mounted loudspeaker .  scion speaker The major role of the enclosure is to prevent the out-of- sound waves from the rear of the speaker from combining with the in-phase sound waves from the front of the speaker. Such mixing results in  and cancellation, speaker causing scion the efficiency of the speaker to be reduced, scion speaker  particularly in the low frequencies where the wavelengths scion speaker are large enough that interference will affect the entire listening area speaker

In some respects, the ideal mounting for a low-frequency speaker loudspeaker driver scion would be a rigid flat panel of infinite size with infinite space behind it. This would entirely prevent the rear sound waves scion from interfering (i.e., comb filter cancellations) with the sound waves from the front. An "open baffle" loudspeaker is an scion approximation scion speaker of this, since the  is mounted on a panel, with speaker dimensions comparable to the lowest  to be reproduced. In either case, the driver would need a relatively stiff suspension to provide the restoring force which scion might have been scion speaker provided at low frequencies by a smaller sealed or ported enclosure, so few drivers are suitable scion for this kind of mounting speaker.

Since infinite baffles are impractical and finite baffles tend to scion suffer poor response as wavelengths approach the dimensions of the baffle (ie, at lower frequencies), scion most loudspeaker cabinets use some sort of structure (usually a box) to contain the out of phase sound energy. The box is typically made of wood, wood composite, or more recently plastic, for reasons of ease of construction and appearance scion speaker. Stone, concrete, plaster, and even building structures have also been used scion speaker.

The loudspeaker driver's moving mass, , (i.e., the stiffness of the cone suspension) determines the driver's , and the  properties of the system (both mechanically and magnetically), both affect the low-frequency response of these systems scion speaker.