Fujita Cold Air Intake System by Fujita


	My shopping cart: 0
	Cart total: $0.00

Call Us (817) 235-0225

Carbon Plated T-bolt Clamps are used in our applications due to their strength and reliability. All of our T-bolt Clamps either meet or exceed the SAE Spec. J1508.
CNC machined air mass sensor fittings are used to ensure proper air/fuel ratios throughout the power curve. Each sensor is carefully engineered for accuracy
Each Fujita Intake System comes with a Super Flow High Performance Air Filter™ designed to maximize efficiency without compensating air filtration.
Each Fujita intake system is made with 6061 T6 Aluminum Alloy. After each application is bent and inspected, we polish it for an extremely bright finish
Hose Techniques® Silicone Hose w/ Dupont Nomex reinforcement to provide stability during both extreme hot and cold conditions, -65°F(-54°C) to +500°F (+260°C)
TIG Welded brackets are used in conjunction with Rubber Vibration Mount Dampening to stabilize the intake system from unwanted stress during load.

Fujita. Cold Air Intake System scion xb Fujita Cold Air Intake is traditionally longer and in most cases extended behind the bumper cover so that it can ingest more direct air. In addition to more direct air, the longer plenum achieves higher torque gains as well as impressive horsepower figures. Depending on the complexity of the plenum route, the Fujita Cold Air Intake may come as a 1 piece or 2 piece intake system. Different diameters, filters, and bends are all key factors of the R&D process of each Fujita Cold Air Intake. The in-house Dynojet is the final judge of which Fujita intake configuration will make it to production. Air Fuel rations are also an important factor in testing the Fujita Cold Air Intake, ensuring that safe and near factory levels are maintained in order to not trip any electronics sensors on the vehicle.fujita cold air intake maximize cold air input by relocating the air filter outside of the engine bay

Unless linear clamps are required Each Fujita Intake System for the Scion xB Comes Complete With:6061 T6 Aluminum intake tubing with polished finish *except special editions HoseTechniques silicone hose w/ nomex Carbon plated T-bolt clamps *unless linear clamps are required Fujita super flow high performance air filter TIG welded bracketry Vibration mounts ch Fujita intake system is made with 6061 T6 Aluminum Alloy. After each application is bent and inspected, we polish it for an extremely bright finish The high gloss Fujita air horn enables air to enter the intake chamber in a high velocity spiral motion. The base of the filter was technically engineered to ensure a smooth and rapid passage of the air into the intake chamber. The high gloss Fujita air horn enables air to enter the Fujita intake chamber in a high velocity spiral motion.